Lighter won't work/Wiper fluid sensor-94 Chrysler Concorde

I would check fuses first.Chances are that you blew one.

Did you check the fuse? When the lighter is not working, the majority of the time it is the fuse that needs to be replaced. Sometimes it has been removed. Check the fuse box some where in the area under the stearing wheel. If you have a manual for the car, it will tell you which fuse is for the lighter. I would suggest replacing it to see if that solves your issues.

Most of the time it is a bad fuse that needs to be replaced. You need to try to replace the fuse before you do anything else. If you change the fuse and it still doesn't work, the cigarette lighter needs to be replaced. Hope this helps! Please rate 4 thumbs up!

Two completely different circuits. The wiper fluid light problem is probably a bad sensor in the wiper fluid bottle. Sometimes you can hit the bottle a couple times to free-up a stuck sensor.

The wipers not working could be a number of things from a bad wiper motor to a bad wiper control switch to a malfunctioning body control module. This has to be diagnosed properly unless you want to spend a bunch of money on unneeded parts.

I have the exact same car, and when I got mine I had to take the dash/console apart (which was actually pretty easy) and re-connect the wires on the back of the lighter. Apparently they tend to loosen and even come off occasionally.

check the wiring behind the lighter and recheck fuse panel for a designated lighter fuse or the lighter housing may be bad if u have power to the lighter than replace lighter unit any auto store sells them

check the multi function switch

Check for vacuum leaks on the high idol. You have a speed sensor or wiring issue with the tranny. Will need to be checked somewhere with a computer to know for sure on the tranny.

Check the owner manual.

open the drivers door remove the end cover for the dashboard