1986 351w into a 2004 ford mustang. Keeps blowing starter relay fuse.
Might be a Short to ground somewhere in the circuit
Where should I look for the ground? I looked at the wires coming from the solenoid and they didn`t seem to be grounding out anywhere.
have you tested the whole circuit including the solenoid wires might look fine but you will only know if they are tested help that helps :-)
×
SOURCE: electrical. alternator fuse link keeps blowing
The wiring harness coming from the solonoid/power distribution has one small guage wire splitting into three different medium guage wires. I have ran into this problem quite often on mustangs, and what I have found that works is take the split out of it, and run all three wires with fusible links added to them straight from the solonoid
SOURCE: Diagram for installing the serpentine Belt on 1986 Ford Mustang
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=FORD&model=MUSTANG&year=1986&year_from=&year_to=&engine=BJ3&l=n
This should Help. Please Rate My Response! Thanks!
SOURCE: A diagram of a 2003 Ford Mustang interior fuse box?
Fuse Box Diagram
Circuit Schematic
I trust that these are what you are looking for, they are screen captures of the requested information right from Ford.
SOURCE: 2001 ford focus gnition fuse keeps blowing
Replace the wire. It is shorting to ground, causing the fuse to blow.
SOURCE: 2008 Ford F450 fuel pump relay fuse keeps blowing.
the fuel pump and radio are not on the same circuit, most liokely the fuel pump is shorted, that is the most common cause, get under the truck and disconnect the fuel pump connector at the tank, if the fuse doesn't blow then u need a new pump.
191 views
Usually answered in minutes!
×