I got a 1997 ram 1500 and my instruments do not work i got illumination but nothing else i changed the cluster and they worked once but no more i need help
SOURCE: 2001 dodge ram 1500 v8 spark plug wire diagram
the firing order is 1 8 4 3 6 5 7 2 clockwise around the cap
SOURCE: Need to replace instrument cluster/AC bulbs
Hello, You can obtain a 2004 Ram Factory Service Manual with all of that information available from Promanuals.net. The reason why it may be so important is because right before the removal instructions the service manual has diagnostic instructions to try. There are numerous pages on removing the instrument cluster, and cluster bezel.
(1) Disconnect and isolate the battery negative
cable. (For Airbag)
(2) Remove the cluster bezel from the instrument
panel. (Refer to 23 - BODY/INSTRUMENT PANEL/
CLUSTER BEZEL - REMOVAL).
(3) Remove the four screws that secure the instrument
cluster to the instrument panel structural support
(Fig. 5).
(4) Pull the instrument cluster rearward far
enough to access and disconnect the instrument
panel wire harness connectors for the cluster from
the connector receptacles on the back of the cluster
housing.
(5) Remove the instrument cluster from the instrument
panel.
SOURCE: Ecu wiring diagram dodge ram 1500 5.9
Welcome to Fixya.com Thank you for using FixYa, Regards, Lee Davidian TTo zoom in hold control and tap the + or - key, Lee
SOURCE: firing order diagram 96 dodge ram 1500
There were three different engines for that vehicle in 1996, here are diagrams of the 3.9 liter V-6 engine, and the 5.2 and the 5.9 liter V-8 engines both have the same firing order.
3.9 liter V-6 liter engine;
5.2 liter/5.9 liter engines;
SOURCE: I need a wiring diagram for wiring spark plugs to
There are 3 different engines for that year but the 5.2 and 5.9 are the same but gave you a picture of both anyway. I hope this helps and good luck.
40 views
Usually answered in minutes!
×