I have a code P0133 on my Si. It is the O2 sensor is responding to slow. How can I fix this.
SOURCE: Theft of 2004 Honda Civic
since the ignition key cylinder wasn't damaged, i can think of a few possible sernarios.
- a tow/repo truck was used
- if you bought the car used, the previous owner had a copy of the key and used it to gain access and start the car.
- if you have taken the car to a honda dealership for service/repairs, someone at the dealership may have encoded (the transponder on) a duplicate key. they would also have no problem looking up your address.
SOURCE: i have a 2005 honda civic si recently my check
P1259 is a code for vtec malfunction usually cause by a bad vtec solenoid, vtec pressure sensor, low oil level, bad connection. Was oil change done? May want to check the oil level. P1166 is a code for a primary o2 sensor 1.
SOURCE: High beam not working 2006 SI civic
In the under-dash fuse box check fuse #18 (20amp), fuse #12 (10amp) and fuse #13 (10amp). Don't forget to check the bulbs. -hope this helps
SOURCE: spark plug torque for honda civic si?
Spark Plug Type NGK: PFR6F-11 DENSO: PKJ20CR-M11 Gap 1.0 - 1.1 mm (0.039 - 0.043 in) 1.3 mm (0.051 in) Torque 18 Nm (13 lb ft)
210 views
Usually answered in minutes!
×