1998 Mitsubishi 3000GT Logo

Related Topics:

A
Anonymous Posted on Apr 18, 2014

Fuses 3000gt engine fuse from inside cars fuse box keeps blowing out when I put the car in first gear. what else can I check what does the fuse control that I can fallow a wire or something

5 Related Answers

Anonymous

  • 18 Answers
  • Posted on Oct 14, 2008

SOURCE: Engine Fuse keeps blowing

Not sure what you mean by engine fuse..depending on where it is . will determend why it is blowing out..I will tell u this. any time a fuse is blowing out.. their is an object that is over loading, something that turns off and on.. like a radio, ac unit,,you have a over load or,, a dead short somewhere,,need to know where this fuse is be for I can help any more..

Ad

Anonymous

  • 104 Answers
  • Posted on Oct 21, 2008

SOURCE: 3000GT FUSE LOCATION

Is there a roller or switch to adjust the dash light brightness? Have you just accidentally bumped it when doing the stereo install and switched it off? If not then it's likely that you have blown a fuse while wiring up the stereo. The easiest way to check fuses is to buy a cheap test light from any auto parts store and hook the clip lead to an exposed metal part of the body (door hinges are usually good) and probe each fuse at both of its exposed terminals (without removing the fuses). The test light should light up on both of the terminals, if it lights up on only one then the fuse is blown. If it doesn't light up at all then the circuit does not have power to it. This test should be done with the key in the on position. Also, the fuse box cover may have pictures of the relevant circuits on it, and you may be able to figure out from the picture which is the fuse for the dash lights and just pull it and visually check it.

Anonymous

  • 1 Answer
  • Posted on Jan 19, 2010

SOURCE: 03' Pajero blows Instrument Cluster fuse each time car started...

Has it had an aftermarket Stereo Fitted? This is the first place I ould look if it has..

raj somaiya

  • 5370 Answers
  • Posted on Aug 28, 2011

SOURCE: 100 amp fuse in engine

For the 100 main amp fuse to blow it has to be a alternator issue , ECM or dead short with the electrical part of the ignition switch.
If the alternator is replaced and still the fuse blows then
check the actual electrical contacts of the ignition switch to see if they are shorted out.------
Check the wire between alternator B+ (large wire) and battery for problems. check negative ground wires to chasis and motor. --------- Also recheck all battery, starter alternator and ground wires and see , that no wire is connected in reverse order.------ Also try cleaning the 100 amp fuse socket with contact cleaner and then install the fuse and see , if it still blows.------Many a time fuse socket itself gets dirty and cause fuses to blow.------ Getting this possibilities checked should help.Thanks.Helpmech.

archaeology

Archaeology

  • 662 Answers
  • Posted on Nov 27, 2011

SOURCE: Mitsubishi Diamante 2001, Car Will Not Start, Attempts to Crank, But no Fire. Blowing Engine Control Fuses repeatedly.

For the sake of completeness, here's the full no-start Troubleshooting Guide for the 2001 6 cylinder 3.5L MFI Mitsu Diamante, but the problem with your car is line item #6 - the ECC (Engine Control Computer) is shorted/dead. Without an ECC, the Diamante will (a) get no spark, since the ignition timing comes from the computer, and (b) get no fuel, since the fuel injectors are operated by the computer as well. The engine will turn over, since running the starter motor is a non-computer controlled matter of a correctly functioning ignition switch, a charged battery, and good wiring to a functional starter motor/solenoid, but will never start.
The clue pointing directly to the ECC failure is the blowing ECC fuses. These fuses are blowing to tell you that the ECC is shorted dead.
Since the ECC is expensive, exhaustively check out all other possible sources of the problems, but with so few problems causing loww of both spark and fuel, combined with the blown ECC fuses pointing directly to the ECC, it seems that the ECC is the only culprit.
Here's a used 2001 Mitsu Diamante ECC at Ebay for $175.

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=270828804340+&item=270828804340&lgeo=1&vectorid=229466


Priority Action Part Type Cause
1 Inspect Choke - Stuck or Improperly Functioning Choke.
2 Inspect Fuel Filter - Clogged or Dirty Fuel Filter.
3 Inspect Fuel Pump Relay - Faulty Fuel Pump Relay.
4 Inspect Fuel Injector Pressure Regulator - Faulty Fuel Injector Pressure Regulator.
5 Inspect Fuel Pump - Low Fuel Pressure.
6 Inspect Engine Control Computer - Incorrect Operating Information Being Delivered and Sent From The EEC.
7 Inspect Fuel Pump Strainer - Clogged or Dirty Fuel Pump Strainer.
8 Inspect Ignition Switch - Improperly Connected or Faulty Ignition Switch.
9 Inspect Battery - Battery Discharged or Faulty.
10 Inspect Battery Cable - Coroded, Broken, Shorted or Poorly Connected Battery Cable.
11 Inspect Solenoid - Starter Solenoid Faulty.
12 Inspect Starter - Starter Motor Faulty.
13 Inspect Wireset - Worn or Damaged Spark Plug Wires.
14 Inspect Ignition Coil - Faulty Ignition Coil.
15 Inspect Distributor Cap - Loose, Cracked or Worn Distributor Cap.
16 Inspect Spark Plugs - Incorrectly Gapped or Fouled Spark Plug(s).
17 Inspect Distributor Rotor - Loose, Cracked or Worn Distributor Rotor.
18 Inspect Fuel Tank - Fuel Tank Empty.
19 Inspect Carburetor - Worn, Faulty or Damaged Carburetor.

The fuel pump strainer is a sock-like strainer in the fuel tank on the input side of the fuel pump designed to protect the fuel pump by straining out any debris in the tank (similar to the way that the fuel filter protects the engine/fuel injectors/fuel pressure regulator).

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Kawasaki mule 4010 diesel keeps blowing 5amp glowplug fuse. Put new fuse in starts idles fine, put in gear drive 10 feet or so blows fuse.

I would pull the connector on the glow plug relay and see if you still blow that fuse. If not, then the short circuit is between the relay and the engine. If it does still blow the fuse the issue is between the fuse box and the relay. A multi meter will help you find the short to ground and the relay test will reduce the places to check.
1helpful
2answers

08 ford lariat f150. Fuse 14 keeps blowing. The starter engages while running and blows the fuse. The starter is not on fuse 14, any suggestions?

What engine ? Fuse 14 , where > under hood fuse box or inside fuse box ? If central junction box inside vehicle ,that fuse powers the heated PCV - positive crankcase ventilation valve . 10 amp fuse . Also powers ,digital transmission range sensor . Your digital range sensor is probably shorted inside . This could cause the problem your having .
5+h+y40chxaaaaaelftksuqmcc
0helpful
2answers
0helpful
1answer

My ecm fuse keeps blowing. i believe its my ecm fuser anyways its something like that i replaced my clutch in my car and put everything back together only to crank my car over and have no spark.. i...

U MIGHT WANNA CHECK THE FUSABLE LINK IN THE FUSE BOX UNDER HOOD SMOTHING MUST HAVE GROUNDED OUT CAUSING IT TO DO THAT ..THE ONLY OTHER THINGS IT COULD BE WIRES IN THE HARNESS IT SELF R OLD OR HAVE BECOME HOT AND R TOUCHING SO CHECK THERE STARTING WHERE FUSE BOX IS ...THEN CHECK URE ECM ITS SELF AT AUTO ZONE IF U HAVE ONE NEAR HOPE THIS HELPS
1helpful
1answer

Winshield wiper motor fuse location 1993 3000gt

Check Fuse Junction Box under dash or fuse box inside engine bay, I have the service manual in pdf if you like.
0helpful
2answers

Heater keeps blowing fuse. 96 gt3000. if its a short, where?

Replace the fan resistor located under dash near passenger side on the side of the heater box.
0helpful
1answer

Electrical problem- horn and stop light fuse keeps blowing

With the fuse blowing like that very likely you have short to ground that is one of the wires to the horn or stop lights is making contact with the body of the car.
As for the gear problem, there is a solenoid that is responsible for unlocking the gear shifter when you step on the brake with the key on the run position even if not running.
1helpful
2answers

My 3000gt does not start. it makes a clicking

1. Loose battery or earth connections on bodywork/engine.

2. Starter stuck in mesh. (rock car backwards and forwards in gear to free)

3. Solenoid stuck. Tap lightly with a hammer.

4. Starter relay in or near fuse box faulty. Replace relay.
0helpful
1answer

Brake light issues

most of those holes are to accessories which are not installed. dont worry about the empty holes, worry about the installed fuse that looks burned out, or check the relays in your engine comparetment, inside what looks like another fusebox under the hood.
Not finding what you are looking for?

282 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...