Need to replace the front bumper
SOURCE: removing door panel in 2000 toyota corolla
remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.
SOURCE: front grill on toyota solara
That is correct - it worked for me - now the questions is - How do I remove the old logo ?
SOURCE: My Toyota Corolla rear bumper has at big dent on
you have to take the whole bumper off and the bolt the u see holding it on the re-bar and bumper cover should come off
SOURCE: How do you replace the headlight bulb on a Toyota Corolla 2003
You can and it is not difficult, there are two bolts holding the top of the headlight to the body just over the radiator and a couple of screws holding the indicato in place, but you can access the back of the light fitting without doing so . It is a bit of a squeeze on the battery side.
SOURCE: How do I replace "front brakes" toyota corolla
Replacing front disc brakes is a relatively easy task. The attached link will walk you through the steps:
http://www.ehow.com/how_4520110_replace-front-disc-brakes-toyota.html
Please remeber to rate this solution. Thanks!
104 views
Usually answered in minutes!
×