I have a 1998 mitsubishi eclipse gst. had the battery chanced and now the radio won't work. have code for radio but don't know how to enter it into radio.don't know what buttons to push. owned car about 7...
The 1,2,3,4 preset buttons on your radio toggle up only through the
digits 0-9. The 1 preset button is the first digit holder, and so on for
the 4 digit code. If you go too far just keep pressing the button, and
it will go back to 0, and you can get back to the right number. If your
unlock code has a 0 in it you have to press the button once to get to 0.
It starts with a dash (-). This doesn't count as the 0. For instance if
your unlock code is 0873, you will press preset 1 once, preset 2 9x,
preset 3 8x, and preset 4 4x. Once you have the correct number in the display press the "CD" button, and it will unlock your radio. If you
didn't do it right, it will display "ERR1" before going back to the
"CODE" display. Don't mess up more than twice. After the third failed
try things get a lot more complicated. Good Luck Tim
×