Reset the maintenance required light on a lexus rx350

You may need the dealership to do it on the next service or get an auto electrician to check the programming. Or try toggling it Off,, turn off ignition and remove the key. Count to 10 and toggle it back on.

https://www.google.com/search?q=Lexus+RX350+the+auto+lock+is+not+working

https://www.google.com/search?q=auto+electrician+near+me

..

There isn't one.

Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.

Transmission Fluid Level Check Lexus RX350 (2010-2015 ...

Steering Fluid

https://www.google.com/search?q=2010+lexus+RX350+steering+fluid+reservoir

and finally, your 647 page Owners Manual

Owner's Manuals ' Get to Know Your Lexus ' Lexus Canada

https://www.lexus.ca > lexus > manuals

Owner's Manuals are available online for the majority of vehicles manufactured in 2008 or later. If you don't find the manual you are looking for or you have ...

2010 Lexus RX350 - Owner's Manual - PDF (647 Pages)

https://carmanuals2.com > lexus > rx350-2010-owner-s...

2010 Lexus RX350 - Owner's Manual (647 pages). Posted on 5 Feb, 2016 by Gefitz. Model: 2010 Lexus RX350. File size: 6.1 MB. Other 2010 Lexus RX350 ...

..

make sure to see till the very end including on how to reset the oil change led on dashboard.
Lexus RX350 oil change by froggy

from inside the trunk remove the trim/panel that encloses the lamp cluster then you can get to the clips/bolts that hold it in place

Oil light needs to be reset. If you still have owners manual the reset procedure should be in the manual. If you had you lexus serviced at the dealership just take it back to them and ask them to reset it.

this light can come on even thought service is not actually due. if the service was performed and the light was not on at the time, sometimes you cannot reset them if they are not actually lit, or 99% of the time the technician forgets if the light was not on. stop by your shop and they can reset it for you in just a few moments, and for no charge. good luck!

PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.