I HAVE A 1981 CORVETTE WITH 1993 350 4 BOLT MAIN MOTOR AND TRYING TO GET INFORMATION ON IT WITH A STAMPED NUMBER M09014VP AND CAN'T GET ANYWHERE SO DO YOU THINK YOU CAN HELP
SOURCE: 1981 corvette blower motor getting
Check the blower speed control resistor pack, it is located in the air stream near the blower motor, that is most likely the cause of the inop blower, but be warned if the blower is drawing to much current due to wear the resistor will fail again, I believe the connector has four wires, 2 are heavy Gage
SOURCE: 1981 corvette blower motor
It is not the resistor that fails but the little thermal limiter next to the coils of wire that form the resistive element, it is round, looks like a little barrel.
SOURCE: Broke one of the mirrored glass tops for 1981 Chevrolet Corvette.
http://www.20thstreetauto.com/specials/spec58.htm here are smoked ones. http://cincinnati.craigslist.org/pts/966430154.html mirrored glass http://cgi.ebay.com/ebaymotors/CORVETTE-78-82-MIRRORED-T-TOPS--TOP--CORVETTE-ROOF_W0QQitemZ330300599122QQcmdZViewItemQQimsxZ20090114?IMSfp=TL090114126005r1464 pairs i will see if i can find 1
SOURCE: 1981 Corvette glass T-Top repair
Sure not a problem! I have a '76 Corvette. I use Mid America Motorworks. You may also want to search Ebay. I have purchased a lot of parts from both places, and have never been dissatisfied.
(I was a little skeptical about Ebay at first, but I dealt with those that have Ebay stores, checked their Seller rating, their Feedback score, and posted questions to them. Always got the part I wanted, and pretty darn fast!)
I bought my carpet set, and various steering components from Mid America Motorworks. They send me a catalog about two to three times a year. They have those T-Top gaskets sets for an '81 Corvette. Your Corvette is a C3 like mine.
SOURCE: I need a vacuum diagram for a 1981 Corvette 5.7
If not under your hood then i would suggest getting a GM. repair manual.
156 views
Usually answered in minutes!
×