What color is the power wire for power window switch

The main hot wire for the power window door switch on a 2003 Pontiac Vibe is the yellow wire. This wire carries 12 volts of power from the fuse box to the power window switch. When you press the power window switch, the switch sends a signal to the window motor, which causes the window to move up or down.
Here is a table of the wire colors for the power window door switch on a 2003 Pontiac Vibe:
Wire Color Description Yellow Main hot wire Green Window down wire Black/red Window up wire I hope this helps!

I can provide wiring diagrams and locations however I need to know what size motor you have. The 2.0L or 2.5L.

Thanks in advance

Normally I recommend anyone serious about working on their VEHICLES purchase the FACTORY+WORKSHOP+MANUAL.

Luckily you will find BBB Industries has your circuit drawings ... wire colors and numbered tabs... to assist in-screwing what ever is BROKEN NOW...

You have "auto" up/down and the DRIVERS DOOR get a little less use than the SAFEWAY STORES front door...

Go to bbbind.com... wade thru the registry... go to their wiring and technical service bulletins...

Re-check that you are in "WIRING DIAGRAMS"...
"BODY & Accessories" and go to "POWER WINDOWS".. you are there...
BBB Industries Premium Alternators Starters Power Steering Products

I'm good with all the "color" letters but "L"
(I'm guessing "lime" trace??)...

You tell me... Hope this helps!!

I would check the wiring harness going into the driver side door, on the hinge side. The wire harness probably has a protective rubber boot covering, see if you can move cover back so you can see wire colors. The yellow wire is voltage for power window master switch. Black wire is ground. The wire harness is flexed every time the driver door is opened or closed.

I looked at info for Pontiac aztek.

Google the
wiring diagram 1995 gmc sierra electric windows I found several systems offering what you require.
But what is the problem, 99% of the time in that year the window regulator was at fault, it was made from a stapped steel housing verses an cast unit. We check the left switch for power, disconnect the two wire connector at the motor, and see if the motor has power to one side or the other in the connector. If the switch has power to it, and the motor has power to it as you press the button, the motor is at fault.

Good luck.

I NEED TO KNOW WHAT COLOR WIRES GO WHERE TO THE POWER SWITCH FOR THE PASSENGER WINDOW I HAVE NEW SWITCH BUT NO IDEA WHERE ETHE WIRES GO TO WHAT PRONG.
AND ITS RAINING!

PS 1987 GMC SARFARI PASSENGER SIDE POWER WINDOW

In the diagram, the brown wire is voltage for power windows. Goes hot when you turn on the key. Voltage comes from the power window circuit breaker. The black wires in the middle of diagram are ground. Use a testlite to check voltage on brown wire, key on. If the brown wire has voltage, to check the black wire for ground, use a testlite between brown wire and black wire. If lite comes on, you have voltage and ground.

There is a wiring harness on hinge side of passenger door correct, take a look at the wiring colors. Hope you can read it. At the window switch, the outside wire on either side is voltage or ground depending on which direction, up or down, reversing motor. You don't need the window switch for testing, you should be able to operate from driver door master switch. If you get the wires reversed, the only thing that will happen is, up will be down and down will be up, if that happens, reverse the wires. Just my opinion.
At the window switch, top middle wire is lockout, so only the driver can operate the windows.

Check the wiring in the door opening you likely have a broken wire or 2 in the rubber bellows.I think the wire color is orange/black stripe.

no but i alway do it like that the window that not working push button uut and jump power to different wire just quick toucht you dont whant to blow fuses it gonna go up cherrs pierre