Location of oil filter on a bmw 325ci 2003

Question edited for clarity. MAKE!
Question moved to Category.

https://www.google.com/search?q=bmw+325ci+vs+bmw+325i

325i

Fuse Box Diagram BMW 3-Series (E46; 1998-2006)

https://fuse-box.info > bmw > bmw-3-series-e46-1998-...
Here you will find fuse box diagrams of BMW 3-Series 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006 (316i, 318i, 318d, 320i, 320d, 323i, 325i, 328i, ..

Ci, Cabriolet

1998-2006 BMW 3 (E46) Fuse Box Diagram

https://www.e46fanatics.com > ... > E46 > E46 General
Oct 29, 2018 - Mine still has the card that identifies all the fuses but that is a good reference if yours is missing. 2002 BMW 325Ci Cabriolet Automatic, 140K ...

..

Use you VIN number to find out the engine and wiring specs. M54 E46 is just a body code. Engines has variants too.

This link will show you all you need to know.
http://youtu.be/RsEWDFHccJA

Dealor !

take it to an accredited service center , put it on a hoist for a proper inspection

The oil filter is located on the drivers side of the engine,close to the radiator.It has a round plastic filter cover youll have to use a wrench to remove it.Once you remove the lid pull the filter out.

It is near the left engine-mount on the six-cylinder models.

Fuses & RelaysThe fuse box is located under the engine hood on the left side, near the upper strut housing or near the battery.
Various relays are also mounted on the fuse box for easy accessibility.



Flashers
The flashers are located behind the bottom center of the lower instrument trim panel.



Review the...
- BMW E36 Fuse Box Relay Layout
- 325ci Owners Manual

Hope helped.

Replace fuel filter and check fuel pump operation. Sounds like fuel starvation.

The engine oil filter is located just right of center if standing in front of the car. By removing the LARGE Black cap with the 36mm nut you will expose the filter element, make sure to do this before draining the oil from the drain plug in the pan. Otherwise the filter will still hold oil until loosened a bit. A typical oil change should go like this.
1. Engine Hot, not running, Loosen filter housing, don't remove yet.
2. Drain Oil, Replace plug.
3. Remove and Replace filter and O-Rings
4. Add oil.