SOURCE: replacing power steering belt for 98' eclipse rs -
if i remember right those belts are not together cuz your car has two belts on it one that goes from the crank pullel that runs the a/c and alt and then one thats from the crank to the power steering
SOURCE: timeing belt replacement
actually if you have never done this before, yes...
there is atool to hold the crankshaft pulley in place to remove and re-torque the crankshaft bolt, you'll need a vise to compress the tensioner, they recomend a tool to remove the slack in the belt after installing the new belt, and you'll need an inch pound torque wrench and a foot pound torque wrench that is able to go to 184 NM. air tools help ALOT!
SOURCE: How do I replace the alternator belt. I can't find
Cars do not have the tension adjustment mechanism. It is done by loosening the alternator or tightening it. Loosen the mounting bolts of the alternator and you will have to belt loosening.
SOURCE: mitsubishi montero sport AWD...AC blows
It may also be the bearing on the pully of the AC or the main pulley. It will be best to take a look at it.
SOURCE: 2000 galant still squealing after replacing belts for alternator and ac. What else could it be?
hi there when my belts squeek i use a bar of hand soap find a safe place to hold soap on belt as the motor is running but be carefull hope it works for you...reg
57 views
Usually answered in minutes!
×