Question about 2006 Mazda Tribute
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
#4 cylinder could be faulty plug wire or plug or coil pack,I would start with plugs and plug wire and if it persist change coil pack I hope this helps you
Posted on Dec 09, 2009
SOURCE: mazda mpv 2004 code p0304
Engine missfire Cylinder #4
P0300 at P0304 Diagnostic Code - Random Misfire
Random/Multiple Cylinder Misfire Detected
What does that mean?
Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly.
A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-firing, nor why.
Symptoms may include:
* the engine may be harder to start
* the engine may stumble / stumble, and/or hesitate
* other symptoms may also be present
A code P0300 may mean that one or more of the following has happened:
* Faulty spark plugs or wires
* Faulty coil (pack)
* Faulty oxygen sensor(s)
* Faulty fuel injector(s)
* Burned exhaust valve
* Faulty catalytic converter(s)
* Stuck/blocked EGR valve / passages
* Faulty camshaft position sensor
* Defective computer
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.
Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.
Hope help with this (remember comment and rated this).
Posted on Apr 24, 2010
SOURCE: what does code P0174 and
PO304--is # 3 cylinder misfiring
PO174---is a lean O2 Sensor Code on bank 2,
from the misfire
So you find the cause, of the ignition misfire,and NO,
it is not spark plugs,wires and a long list of parts, that
It is a bad ignition coil or igntion module,which ever applies.
Posted on Dec 01, 2010
Tips for a great answer:
Apr 13, 2018 | Mazda Cars & Trucks
Jul 20, 2016 | 2002 Mazda Protege
Apr 18, 2015 | 2001 Mazda Tribute
Jan 27, 2014 | Cars & Trucks
Apr 13, 2010 | 2003 Kia Sedona
Feb 09, 2010 | 2001 Dodge Caravan
Aug 06, 2009 | 2001 Mitsubishi Eclipse
12 people viewed this question
Usually answered in minutes!