At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the 3 prongs (2 silver & 1 gold) line up to connect properly when you put it back in. I had to pullout the gold outside of where the bulb sits and slightly pull out the 3 in the actual lens to get a good connection. ***This is what makes the turn signal wireless... They have to be aligned and have contact****
under the dash on driver side in front of the fuse box. But before hand pull out the middle of the dash where the hasard button is and check the plug. All of the signals that flash are circuited together an if the hazard button is unplugged the turn signals and rear lights will not work.
The tiburon turn signals are controlled by a bcm (body control module) The bcm controls the ground to the signals. These always go bad and cause the signal to stick on or just not work. hope i was a help.
×