Question about 2009 Lexus IS 250
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2000 Lexus ES300 - 45K
Are you sure this is a rattle or is it more of a creaking noise? I have a 2000 ES300 and had an issue when I would go over speed bumps and the noise would drive me nuts! However replacing the bushing in the top of the strut mount is expensive due to the labor involved.. Replacement of the strut or the bushing isn't necessary. Just open the hood, locate the strut housing and you ll be able to see the black rubber bushing in the middle. Obtain a can of Heavy Duty silicone aerosol spray and attach a straw to the spray tip. Using a flathead screwdriver wedge the screwdriver between the top of the bushing and the metal pushing the screwdriver all the way to the edge of the metal underneath the roof of the metal housing. Then pry the edge of the bushing away from the metal housing so that the top of the edge of the bushing exposed and stick the straw end of the silicone into the spot and spray generously. Only slight bushing movement will be obtained as the bushing is pretty stiff but it will be enough. Work your way around using this technique until you get the spray fully around the bushing 360 degrees getting it into the area between the edge of the bushing and the metal. Then spray the silicone onto the top of the bushing filling it all the way up until it spills over the metal. After it drains down, repeat again making sure you fill it above the rim of the bushing so it seeps into the area between the bushing and he metal housing (or frame) because this is where the rubbing is taking place that is creating that awful noise. Repeat on the other side and your done. The main goal is to get the silicone into the area between the metal and the bushing along the edge. This happens to be the way I was able to do it. This totally solved my problem and now the car is so quiet there aren't any knocking, creaking or rattling noises. This was a hard solution to explain without visuals, hope you can follow. This will work for sure. The Heavy Duty Silicone spray I used was manufactured by CRC and I bought it from Walmart.
Posted on Jul 22, 2009
it has electric power steering, take it to the dealer and ask if the service campaign has been done on the power steering rack. if not then it will be free and they will wash your car for you, fill up your gas tank and replace the steering rack and align the car. if it has been done then maybe they didnt reset the steering gear ecu.
Posted on Oct 08, 2009
Hi! THe power switch on the driver's control may be activated. Try pressing the ON and OFF button of the power window. This may have jammed somehow. HOpe this helps and thank you for using FixYa!
Posted on Oct 12, 2010
Tips for a great answer:
Jun 02, 2015 | Lexus RX 330 Cars & Trucks
Apr 23, 2014 | 2013 Lexus LS 460
Mar 30, 2014 | 2009 Mitsubishi Lancer 2.0
Aug 16, 2010 | 2009 Lexus IS 250
Jan 22, 2010 | 2009 Lexus IS 250
Aug 23, 2009 | 2006 Lexus Gs 300
Jul 23, 2009 | 1992 Toyota 4Runner
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: