- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity.
Question moved to model category.
Resetting the airbag light on your Chevy Silverado should be easy to do. Follow this video to watch it being done in a Chevy Silverado. To start with, you will:
Put the key into the ignition
Turn the key to the "on" position
Wait for the airbag light to turn on
Wait to continue until the airbag light turns off (around seven seconds)
Repeat the same steps twice more
Turn on your engine
After you take these steps, your airbag light should turn off. If it doesn't do so, then you should consider taking your vehicle in for diagnostic testing.
If the airbag light remains on, it could mean that something in the system is faulty. That could mean the airbag, the computer wiring, or another issue. Oftentimes, when the airbag light comes on unexpectedly, it is because of interference with the switch. Feb 12, 2021
Question edited to fix.
Question moved to model category.
If it is random, it may be a bad clock spring.
Why wont my airbag light go off?
Go to see an auto-electrician if the airbag light still won't turn off. A worn-out clock spring inside your airbag's control module, a dead backup airbag battery, or a corroded terminal inside the airbag system are commonly the reasons why the airbag light is illuminating. In rare cases, your airbag may need to be serviced.
Dec 10, 2022
The light for the Airbag/SRS system is on because the system control module has sensed a fault and turned off the airbag SRS system. What you must do now is have a scan done of the airbag module to see what fault codes show up in the airbag modules memory.
{: ) If the airbag light goes off after that 7 blinks (some are 6 or 8), that will be normal. The airbag module will blink the airbag warning light on the cluster while performing self-test during initial start-ups. After the self-test and the airbag module did not detect any fault within the airbag system, it will turn the warning light off. If the airbag warning light continuously blink or stayed lit after the expected elapse time, then there is really a concern and you need to double check the airbag system with a scan tool.
If your airbag light comes on it means its not working. Some of the newer airbag systems have weight sensors under the seats and anything lodged under them can disable the passenger airbag and possibly cause the light to go on. If there are no other symptoms, and nothing impeding the airbags then the car thinks the airbag wont work. If you are concerned for your son's safety, take it to a qualified mechanic and have them check/replace your airbag. Good Luck!
This is either a problem with one or both of your airbags or the airbag connector located at the back of the glovebox has been disconnected for some reason. (ie. to prevent airbag opening when installing baby seat) (1999 miata does not have a baby seat airbag disabling sensor).
You should get your car inspected at your local mazda service to check if this is a wiring (plug disconnected) issue or one of your airbags is malfunctioning and needs to be replaced.
Flashing airbag light could indicate that either one of the airbags or both have a problem. Disconnecting the passenger's airbag has the same effect.
Warning! Do NOT attempt to do any kind of airbag/airbag wiring related repair yourself. Airbag problems should be addressed ONLY by certified technicians at your local Mazda service. (Airbag fixing requires for example that the car battery is disconnected, you MUST NOT attempt anything with the car battery connected).
×