SOURCE: saturn sc1 starting
check coolant temp sensor located at driver side end of cyl head. remove sensor and check or cracks. also check connector for corrosion. if cracked, go to dealer for replacment. they eill sell you a new designed metal sensor to replace your cracked plastic one. dont buy aftermarket, they will not be accurate. cracked sensor will cause eng. to run rich. may start ok cold but not when hot.
SOURCE: 93 saturn sc1 fuel line release
All you should have to do is squeeze the plastic clips together, you may need a pliers. Another thing that helps is spray some WD-40 in there and rotate the filter on the line a little.
SOURCE: Got wires crossed while changing
According to Saturn timing specifications, the internal
firing order for the Saturn 1.9L motor, both Single overhead cam, or
Twin cam is as follows:
Left to right 1-3-4-2
If you are routing spark plug wires, and need to know the order of wires
from the coils to the engine, the order is as follows:
Left to right 4-1-2-3
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
Testimonial: "This TOGETHER WITH the diagram @ this link are GREAT:http://3.bp.blogspot.com/_dqKWdnc4O5I/TDfWgKIxcaI/AAAAAAAAABY/6hIGVNFKpsg/s1600/asparkplug1.gif"
127 views
Usually answered in minutes!
×