If I understand your statement correctly, noise but the engine will not "turn over." This sounds like the starter motor is running but the gear that engages the flywheel gear-teeth is not making contact at all or is moving into too-slight contact, just enough to make a lot of noise. In U.S. cars the device on the stater motor that moves the starter gear forward is called a "Bendix." As the starter motor starts to turn, the Bendix shoves a small gear forward, engaging teeth on the flywheel which spins the flywheel to start the engine. If the Bendix is sticking or has failed the gear will not move forward at all or not far enough.
Sarting with the least cost first, I'd look toward a "sticky" bendix. Try using a light penetrating oil or perhaps, WD-40 to free-up the Bendix.
246 views
Usually answered in minutes!
×