Toyota p1300 no start code p1300

Error Code: DTC P1300
Description: Igniter Circuit Malfunction
Solution:
To repair the code please do the following:
1. Check spark plugs.
2. Check for open and short in harness and connector in IGF (Ignition Confirmation) signal circuit between ECM and igniter.
3. Disconnect igniter connector and check voltage between terminal IGF of ECM connector and body ground.
4. Check for open and short in harness and connector in IGT1 - 3 signal circuit between ECM and igniter.
5. Check voltage between terminals IGT1 - 3 of ECM connector and body ground.
6. Disconnect igniter connector and check voltage between terminals IGT1 - 3 of ECM connector and body ground.
8. Check for open and short in harness and connector between ignition switch and ignition coil, ignition coil and igniter.
9. Check and replace ignition coils with a good known one.
10. Check and replace ECM with good a known one .
Hope that works.
Thank you for visiting Fixya.