You should be able to open the cover piece that holds both lights. This piece if you take a flat head screwdriver carefully, just pry the plastic cover (not the actual push buttons), and release it. You should now have access to the lightbulbs for replacement.
SOURCE: replacing drivers side air bag on 2006 pontiac g6
irst, You must get the steering wheel with controls. I believe part numbers were listed above, but bottom line, make sure you get the right color if you are ordering. The black one is called ebony. Prices vary depending on where you get them. I got mine from a salvage yard brand new for $75. Second, You must replace the clockspring with the column harness. If you have a light duty pickup, you will need part number 26101829. This is for a 2 stage air bag. If you have a heavy duty, order part number 26101828. This is for a single stage air bag. If you are unsure, take off your airbag and look to see if it has 1 or 2 pigtails connected to it. 1 is a single stage, 2 is a 2 stage. GM has reduced the number of part numbers available to simplify things. Therefore, you will get a harness equipped with an additional 8 pin connector. This is for the steering wheel speed sensor for quadrasteer. If you do not have quadrasteer, just tape it to the column and don't worry about it.
Be careful when installing the harness, there are about 14 connectors, I spent 2 hours installing the harness and wheel.
1,037 views
Usually answered in minutes!
DO NOT PRY IT UP WITH A SCREWDRIVER!!! It has to drop out. Lift console up, and plate drops out. Not that simple, but that concept.
×