Alldata online c1345

check your distributor 5.7 s had hiccup code may read for cam or crank problem but the timing would get a little out of spec with the distrib-------------------------https://chevytrucks.org/chevy-p1345-engine-code/ --------------

year model and engine code please

year , engine code and model will help

C1345 Linear valve offset not learned.


from link below
GS430 ABS Brake Lamp on after replace brake pad by myself Club Lexus Forums

NEED MORE INFO!!!
WHAT IS THE UNIT???
CAR?
TRY THIS CHART
http://support.alldata.com/alldata-repair-online-article/vin-to-year-chart

its in the FSM for every car. get one.
ONLINE (or google for free, like we do)
or login to alldata.com
its there too.
what transmission on car? manual sticK?

you disconnect each end, then replace cable.
then put it back and adjust it as the FSM tells you.
all cables, all cars,.
why not get an alldata.com account.
and not have to ask every page in the book at every service issues/?

on most cars, dismantle the console, (can vary by body options when new)
this is the gain access to upper cable end.
then remove cable end clip
then at the transmission that clip
the any clamps holding the cable sheath , dismounted.
bam its off car.
this action is same for all cables.
all have 2 ends. and a sheath

if no fsm, nor alldata.com
then fiddle the adjusters until it shifts correclty

be more specific?
fuel cut off?
if you go to online, FSM (or buy one from SUZ)
the factory manual covers all this.
and varies by year,.
its all here, alldata
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

Haynes or Chilton manuals for it would be available at auto parts stores. Libraries often have many repair manuals.
For online sites, a couple are www.alldata/diy.com, and one from Mitchell1 (eautorepair.com) with weekly, monthly, or annual subscriptions. I believe the alldata site has only annual or 4 or5 year subscriptions.

Hi iam facing with c1345 error in toyota agent they tried to solve the problem with diag but werenot clear the code due to undone calibration on selonoied valve. They need 120 seconds to do the calibration but in 88 sec test mode is change to check mode. Any advise on mentioned problem?

Have you tried Autozone's web site in the repair section? Its free, all you have to do is register. Also Autozone markets AllData. Its not the greatest source but better than a Haynes. You can subscribe to Alldata online for a year (or longer if needed).