Check engine light on, starts flashing, engine starts misfiring, then stops misfiring, runs good, engine check light goes off, obd2 port not working, fuses good.
SOURCE: When 1999 Toyota sienna xle check engine light is
If the light was flashing when it came on, then it means your engine is misfiring.
A solid light can mean anything from a loose/faulty gas cap to a transmission issue.
This
light comes on when the computer detects a
fault of some sort in its diagnostic tests. If it keeps detecting this
issue, the light will remain on. If the light turns off, then it has
detected that the issue may no longer be present.
In
order to find out what the exact reason was for your light, You need to
have your car computer scanned to retrieve the code that
the computer would have stored when the light triggered. Most garages
will do this free of charge. The code will tell you what may have
caused the light to initially turn on.
SOURCE: Check engine light came on. OBD2 gave me 5
Take it to autozone. If you live in USA. They have a thing that checks and they will tell you exactly what the codes mean.
SOURCE: 1999 toyota camry
Take it to autozone and have them to pull a code on it.It sounds like O-2 sincer
SOURCE: toyota sienna interior lights not working
The problem is in the sunvisor light. You will have to take the light assembly off and you will find wires have become disconnected.
Daviscacare.com
757-689-4701
SOURCE: Turn signals and hazard flasher stopped working in
Yes, you are on the right track. More than likely it is a defective flasher relay as one relay controls turn signal and hazard flash. The flasher relay is located behind the left side of the instrument panel.
Testimonial: "clay58 is very knowledgeable. His advice was on the money. Thanks!"
599 views
Usually answered in minutes!
×