At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2003 Mercedes CLK 320 and find that the high beams do not work regardless of trying the switch, checking the fuses, and having the bulbs checked at an auto parts store. The bulbs are good. At
Just trying to find some answers to the above issues.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Solution: If both headlights aren't working, it's unlikely that a bulb is at fault. The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. ... Consult your owner's manual to locate the main fuse for the headlight circuit and replace that fuse with one having the same amp rating.
OR
Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don't work or low beams don't work. The cause: A burned out bulb, or a problem with the high beam switch or relay. https://www.lifewire.com/fix-non-working-headlights-4137021
I would say your headlights have burned out. Often times people will lose one and not notice until the other one also burns out. If you can get someone with a voltmeter to check at one headlight for 12-13.8 volts while the headlights are switched on. If voltage is present at the connector then the bulb is burned out most likely. I've seen this many times. Your high beams probably work.
this may be a broken track or if it doesnt move at all then it may be the motor or the switch is bad, try pushing the switch hard and hold while you wiggle the switch, i would check the fuses to make sure there are no bad fuses.
I purchased a MB CLK 320 and set the radio frequency and successfully put the freq in memory, however, the radio blinks tthe freq. Is this normal or do I have to enter another key to stop the radio from blinking? Ed Massachusetts
×