The serpentine belts came off while driving and the crankshaft bolt was loose,I took it all apart and put back together,now there is still play in the harmonic balancer.
SOURCE: 95 geo prizm hamonic balancer belt pulley
Wow!!! I don't think I would put that much faith in gorilla glue. I had the same problem and had to replace the hb pully. My belt ended up slipping and jumped a few teeth causing the car to be badly out of time. Fix it before that happens.
SOURCE: Crankshaft pulley Nissan Pulsar '91 N14
Hi your alternator pulley is hold by a nut about twenty mm, chech it it may be lose......good luck
SOURCE: harmonic balancer coming out.
You say the bolt is tight? then if that is the case the balancer out ring is comming apart, the balancer needs to be replaced
SOURCE: Crankshaft pulley (vibration damper) moved forward.
the pulley is also a dampener often times they seperate from each other. replace pulley/dampener.
SOURCE: 1993 Geo Prizm Lsi Harmonic Balancer
Yes a harmanic balancer from tha corolla is the same thing. I had to do the same thing with my 95 geo. It works out to be a lot cheaper buying for a toyota than a geo.
Kia_Sedona_2002-2006
Accessory Drive Belts
Fig. Accessory serpentine belt routing-3.5L engine
Fig. Accessory serpentine belt routing-3.5L engine
Fig. Accessory serpentine belt (A) routing-3.8L engine
Inspection
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
Removal & Installation
Fig. Accessory serpentine belt routing-3.5L engine
Fig. Accessory serpentine belt (A) routing-3.8L engine
147 views
Usually answered in minutes!
×