Ive replaced odometer cluster, replaced alternator and replaced battery, it doesnt blow everytime i start it usually when its sat a day or two it will blow upon starting
SOURCE: 04 Tahoe blowing fusible link in fuse box for starter
HI...
ON the fuse box cover.
IS there a especification for the funtion of the fuse. or the number of the location of the fuse.
If you can give me, I can try help you. as more I can.
Thank you for use fixya.
SOURCE: I HAVE A 1985 K30 6.2 DIESEL 4X4 MILTARY PICKUP
The reason the fuse blows/melts is because there is excessive draw. The other alternator could be wired wrong. Check to make sure the wires are correct gauge.
SOURCE: keep blowing out auto door lock fuse
after you replace the fuse try closing the door and put the key in and turn it back and forth locking and unlocking it and see what happens when you use the power lock
ray
SOURCE: 50 amp fuse keeps blowing
There are several ways to solve this problem. You need a schematic of vehicle from Haynes or whoever, such high amperage I would place in line fuses to each item, that way it will isolate problem then look for bare or rubbing wire under seat or in doors ( too much junk jammed under seats) ? Anyway with a little time and some disassembly should be a simple fix.
SOURCE: gauges blow fuses,brake and turn signal lights dont work
all my gauges quit working and my turnsignals checked all my fuses under the hood and dash whats my problem?
201 views
Usually answered in minutes!
×