Turn key to position 2. press the button to show the service due light. release button. turn key off. press and hold the same button to view the service light, within 2 second turn key to position 2. wait up to 10 second and the light will reset to show new service. This may take a couple of trys (make sure the doors are shut).
Need to do service confirmed:
1- Door closed key position 1 (make sure you have the temp. screen up before starting) immediatly after turning to posistion one, press the reset button 3 times. and the battery voltage should come up.
2- Page down to serivce data menu.use plus and minus to select service data and hit page down to select.
3- Use plus and minus to scroll down to “confirm overall service” , then hit page down. It should say service confirmed.
4- Take the key out ant put back at position 2, the service message should be gone
Hi rhaber, i would like to say Thank you, excellent information that you share. I stupid at first i did not read it carefully. But then when i read it very slowly and understand it word by word, while following what it mean, then bingo i got it . I'm happy and say thank you.
For those who want to do it by themselves, please read carefully and understand it fully and do it slowly and you can do it. Thanks
×
SOURCE: reset a service light 2003 ml350
Switch ignition on and immediately press the button to the bottom left of the speedo (trip reset type button) TWICE !!
Switch Ignition off
Press and hold same button while switching ignition on.
After 10 seconds a new interval will display followed by a beep.
Release the button and switch ignition off.
All done.
SOURCE: How do u reset brake service indicater after brake
this needs to be done by a mercedes dealership/garage
9,965 views
Usually answered in minutes!
×