Question about 1996 Hyundai Accent

1 Answer

ENGINE STOPS WHILE RUNNING/HARD STARTING

When i start the engine, sometimes it will not start. sometimes it will start but it is hard starting.most of the time, while running, the engine would suddenly stop. it will not re-start unless i spray fluid. sometimes. it will just start again. what is the problem? please help. thanks...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Hyundai Master
  • 1,121 Answers

Mr Reyes, I personally believe that this is the sign of a timing tooth jumped and it is necessary to ask help from your local mechanic.

Posted on Mar 10, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2000 HYUNDAI ACCENT STOPS RUNNING

Hi had a similar problem last week with my 2000 accent took car to dealer who put it on the computer, turned out that the 'mass airflow unit' needed replacing. Very expensive part cost £182 and labour £36 (Hyundai dealer) sorry!!!!

Posted on Dec 03, 2008

  • 2418 Answers

SOURCE: crank no start: has no spark and only has injector

Fuel pump, you have to have press in the rail to fire all injectors- she will run on ether but not good for her. Ck your pump and any related fuses,relays,wiring.

Posted on Jul 12, 2009

czaa
  • 5924 Answers

SOURCE: i'm having trouble starting my

i dont want u to be a partz replacer like those dealership boyz-it could be that the fuel pressure regulator is bad-thats why repair manuals r so good-see u r gettin spark but the petrol not there-hopefully the pump was installed rite-now the regulator is in engine area n thats where to concentrate

Posted on Aug 16, 2009

ghost45
  • 1280 Answers

SOURCE: 1999 Hyundai Grandeur suddenly stop and couldn't start again

Coolant Temperature Sensor

Posted on Oct 19, 2009

  • 3640 Answers

SOURCE: The engine stops running after 10 minutes of driving

could be a bad crank sensor, a bad crank sensor will let car run for a while then shut down and will not start for 10 to 15 min. and it will repeat this cycle if not fixed.the crankshaft position sensor provides the ignition module and pcm with a crankshaft position signal. the module uses this signal to determine spark for each cylinder. the pcm uses this signal for proper timing of engine.

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi 6m 70 engine my car engine is sometime hard to operate but sometime easy operate what problem can be.


Min, You will need to break it down further as to what it is doing/not doing.
If hard to operate, do you mean cranking/starting from key?
Do you mean starting from hot/cold?
Do you mean the engine is not running correctly?
Do you mean when it drives its not right?
You have to go through the type of fault and be more accurate or get a more knowledgeable person to help before you ask the forum. We are good but not magicians.

Nov 05, 2013 | Cars & Trucks

2 Answers

Idles ok, stalls out at stops sometimes, and will not go faster than 20 -25 miles and hour sometimes it is now showing a hard start symptom. Fuel pump has been replaced showed 30 lbs on line


Check the engine coolant temp sensor and the intake air temp sensor for proper function. If either of these two sensors is stuck at full hot, the computer will see this and not schedule enough fuel for running at actual temperatures that are less than full hot. So most of the time you'll run super lean and have no power. Lean stalls and hard starting--especially when cold--are other symptoms of this problem.

Feb 09, 2011 | 1996 Land Rover Discovery

1 Answer

Hi Gurus, My 4JX1 engine is vibrating on idle. Idle speed is about 750rpm. At hgher speed the engine runs smooth. The problem is the engine dies off in the middle of driving. Sometimes it will start again...


Are you running the recommended oil grade? As the injection system is operated by engine oil pressure using the wrong oil grade can prevent your car from starting, running smooth or hard starting! Ideally they require a 5W30 oil grade. Idle speed is controlled by the engine control unit! It's a common rail diesel engine so there's nothing to adjust! The Camshaft position sensor could also possibly be intermittently faulting causing similar symptoms! It's located on the front of the cambelt cover(gray coloured sensor)

Oct 08, 2010 | Isuzu Trooper Cars & Trucks

2 Answers

Hard starting when cold ( engine cranks normally )


see if your engine has a ECT sensor (temp sensor that delivers information to your ECM) they are installed on the intake side of the cylinder head, it usually has 2 cables, have it checked replace if necesary

Nov 19, 2009 | 1991 Jeep Wrangler

1 Answer

Hard starting and stops running after it gets hot


What s making it hard to start/Battery down/Slow turning over /lack of fuel.etc etc??
How hot does it get /how many miles before if stops running/How hot does it get before cutting out./Has the engine overheated in the last 2 weeks /do you loose coolant and how much a day/ does it sound like its missing sometimes.
Let me know the answers to all the above ASAP Ron

Nov 04, 2009 | 1989 Chevrolet C2500

1 Answer

2000 Nissan Maxima Hard Starting


2 things to replace and one more to check, 1 replace fuel filter, 2 replace air filter, 3 check oil level,

Apr 13, 2009 | 2000 Nissan Maxima

1 Answer

1999 toyota tacoma 4by4


I don't know if your truck uses this method but several vehicles I have owned would turn on the electric cooling fan to combat the natural temperature rise that occurs in the engine once the coolant is not circulating anymore.
This prevents hard starting in a hot engine and if the thermostatic switch fails that controls the fan, the cooling (and turn-on) doesn't happen.
This may be your problem.

Aug 05, 2008 | 1999 Toyota Tacoma PreRunner

Not finding what you are looking for?
1996 Hyundai Accent Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...