SOURCE: 2000 town and country van back door will not unlock
sounds like the lock is seized, you will have to remove the panel,it's held on with screws and snap plugs, remove all the screws and then gently pull the panel off. you will be able to open the hatch by sliding the lever sideways. the latch and mechanical lock are the same unit. it has a electrical actuator. your dealer or regular tech sould be of great help in this very simple matter.
SOURCE: My 2001 Chrysler Town & Country passenger sliding door won't open
your door panel can come off and you can access internal door locking mechanism from inside car first inspect to see all rods are hooked into plastic sleeves then make sure lock is disengaged by pulling rod towards rear of van it should then be able to be opened easily if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel once you do that door will open if you cant make lock work manually once this is done replace locking mechanism or rods accordingly.
SOURCE: The power lock (driver's side sliding door) on our
Take a look at end of door where latch is & post where the 2 meet when closed. Look for round metal button/contacts, about 1/2" in diameter. If you look close, they should line up to make contact with each other when door is closed. Take some fine steel wool (preferred) or fine sandpaper and scuff them up until you see metal is clean on both surfaces. Now try it, and let me know what happens.
SOURCE: 2005 chrysler town and country passenger power door
The cog belt could be missing teeth or have debris in the cogs...
SOURCE: My passengers side sliding door
Look at the other door and look on the front edge to see where the child safety lock switch and see if that is the problem with the other door. That has happened with mine several times. Someone will play with it leaving it on so it can't be opened.
366 views
Usually answered in minutes!
×