Check engine light on and D blinking in drive on 2003 CRV

SOURCE: 2003 Honda Accord Check Engine / Maintenaice Requeried

If you brought your car to Honda for service, they probably forgot to reset the maintenance reminder. If you took it to another shop, they probably did not know how to reset it. Anyway, the reset procedure is:

Put your key in the ignition
Turn the key to the II position for a couple of seconds
Then turn the key to the off position
Now push and hold in the odometer reset button
While still holding the odometer reset button, turn the key back to the II position
Hold for I think 10 seconds or so and your maintenance reminder light should reset it self.

Dave Sargent

• 488 Answers
• Posted on Dec 15, 2009

SOURCE: 2004 Honda CRV Check Engine light

the check engine lamp is not affected by things like tyres, brakes etc. It shows that the vehicles engine management system had detected a fault with the engine or engine sensors. Check the engine for broken or disconnected wiring (maybe it was disconnected during the replacing of the hoses but not reconnected). If you fail to locate anything, check the manual for the correct fault code retrieval procedure or take the vehicle to a professional. Tyres may affect your ABS system or Airbag systems but they usually have their own warning lamp and are unrelated to the check engine lamp..

SOURCE: check engine light is on together with the vsc and

Hello. Many times the check engine light and VSC and trac are all on due to one or more bad sensors as opposed to any serious trouble. Begin by having your car's computer scanned. AAMCO transmission shops now offer a free scan as do some auto parts stores. Begin with that. Joe
please rate my answer as very helpful thanks.

Testimonial: "Thanks Very Much!!!"