2006 Mitsubishi outlander 2.4lt engine with timing chain, trying to find the location on the engine for the crank angle sensor
Inside timing belt cover 
SOURCE: Cam Belt on Outlander 2.4 litre Petrol - 2004
The vehicle has a belt and should be changed every 60,000 miles.
SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
SOURCE: crank angle sensor location
The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.
SOURCE: mitsubishi outlander cooling fans not operating
There is a Recall to replace your cooling fan module because of this concern.
Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.
Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.
If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.
SOURCE: What are the best tires suitable 07 Outlander XLS
www.tirerack.com They have a great setup on deciding which tires you want with a ton of information.
2,241 views
Usually answered in minutes!
×