At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: The turn signals do not work on 2000 nissan...
1.Remove front & Rear turn signal Bulbs.
2.Replace Fuse.
3.Signal on.
4.Fix rear Signal Bulb.
5.Fix Front Signal Bulb.
7.If your Fuse blown.
8.Defect is There.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Possible shorted transmission harness or transmission shift solenoids. Disconnect the big connector at the transmission under the car and see if the short stops and fuses don't go.
Did the scooter start OK when you first started it after bringing it out of storage, or did you have to use the kick starter? Maybe the battery is faulty and is pulling a lot of power.
Check the charge rate with an ammeter (use a multimeter that can measure 20 Amps DC) and see if the current exceeds the 15A rating of the fuse. If it does, replace the battery.
check the hazard switch pull the switch and put a volt meter on the connections with wiring connected to switch if it don't respond or just gives you a L.O your switch is bad and shorting out could happen just from being used a lot or something internal broke switch for that shouldn't be all but 50$ or just go to a parts/scrap yard
you have a short... a bad ground somewhere. sorry i cant be more specific but if you have a wiring diagram you can find the ground for this... possibly corrosion but unlikely. good luck
Did he replace the bulbs ? Check the bulbs and replace . Also check the fuse again.to see if it's blown.check all the bulbs and fuses to all the lights. They may be integrated in on or two circuits.
you might need a Turn Signal Column Switch, I have a 1993 Nissan Pickup and my fuse blew all the time. I dexed that problem i have some wires in the back of the truck that was rubbing on the frame. Now my running lights are not working and when i turn on my head light one will come on so i will have to turn on and off about 10 times then both of them will come on, so my turn signal switch is bad.
×