Need an illustrated diagram on how to remove and replace the speed sensor on a ford windstar 1998 3.8 liter engine. thank you
The Vehicle Speed Sensor is located on transaxle, at the rear of the engine. I would check the harness connector to be sure it is clean and connected tightly. Also check the wiring for cuts and chaffing. Since it is fairly inexpensive, only about $42.00 from Ford, you may want to consider replacing it, at least to eliminate it as a possibility. You may want to go to a muffler shop to have this done like speedy, I believe the flex pipe needs to be undone to get to the VVS. If there is an Auto Zone around your area, you could always ask them for the step by step instructions to replacing the VVS, and it's free of charge. Good luck and hope this helps.
For thgose of you who are not aware of it. there is a recall on 1998 ford windstrars for cruise control problem.
2,823 views
Usually answered in minutes!
how do you remove the 3.8 engine in a 99 windstar
×