Turn on wait for controls to go though sequence and heater plug light to go out try start ,nothing? Try again and starts straight away ?
SOURCE: 1998 land rover discovery won't start
I just expiriance the same problems on my rover so i check it out and found that the engine spark fuse was out. I replaced the said fuse and their you go it started. You can find that fuse under the dashboard in the satellite 1 fuse box. it should be the 3rd one from the right. Good luck buddy hope that helps you out.
SOURCE: 2006 Range Rover Sport heater and A/C fan do not
Check all electrical conections. If they are good then it is probably the switch itself.
Testimonial: "I'll take a look at the switch. All connections seem fine."
SOURCE: wont start funny clicking sound when i turn the key ???
Hi!!
The clicking you are hearing, is the sound of a weak battery, Jump start the vehicle and take it to an AutoZone for a Charging System check.
Good Luck!!
Testimonial: "thank you very much real helpful worked a treat."
SOURCE: range rover l322 2002 heavy power steering renewed
The Solenoid fitted on the Steering Rack is not getting the command from The Body Control Unit. Kindly Replace your BCM and then your problem is solved. You can try to make sure by giving direct current of 12v to the solenoid and check the Steering. if it works then simply change the BCM as it's not giving d command to the Solenoid. Salman EiD
SOURCE: 1998 range rover p38 2.5 dse auto engine stalls
Sounds like something is overheating then and possibly a sensor. Not familiar with Rovers but might be a problem with the CAS and/or CPS which tells the ECU the motor is running and when to fire. Also maybe the IAC is bad and when you go from throttle to idle it can't control it and allows it to die.
547 views
Usually answered in minutes!
×