Where is the relay located for the window wiper motor
SOURCE: Windshield Wiper Not Working Properly
Well sure enough all I had to do was replace the circuit board...wish I had done this a couple months ago...it was so easy to do and will now be much easier to drive with being able to see clearly again....
SOURCE: 2003 Chevy SuBurban The windshield wipers will not
It is actually a wiper control module that controls this. I have replaced many of them. It is the cover that is screwed to the wiper gear box. Remove both wiper arms. Remove the plastic cowl cover below the windshield that covers from side to side. Once inside you will see the wiper motor/transmission assy. Disconnect the electrical connector, and remove screws from cover, and replace it.
SOURCE: trying to find location of wiper motor relay on a
if you can see your wiper motor, there is a black panel were the wires hook up to it, remove the three torx head screws unplug and pull out the wiper module. thats your relay and they are replaced a bunch, the've had a lot of problems with these modules.
276 views
Usually answered in minutes!
×