The abs light stays on also the brake light stays on what is the problem can I fix it myself
SOURCE: ABS Light illuminated on Van
ABS diagnostics requires a scan tool (Chrysler DRB II, DRB III or aftermarket equivalent). the plug is located near the brake pedal. this is the only alternative to get the ABS light off.
SOURCE: on my 2002 DODGE DURANGO ABS and Brake
I have a 2002 I had to take the sensor out of the rear end. It is located on top. remove the screw and it should pop out. Be carefull. I had to clean it off and re-install. After that it went off this is something to try.
SOURCE: 1999 Dodge Durango. Brake Light and the ABS Light
If you backup lights are not working as well, I would say check the fuse for the backup lights, if the fuse is good, see if you are getting power to that fuse. We had this problem and after weeks of searching and changing sensors, we found the backup light fuse was good, but not getting power. Ran a wire from that fuse to the cig. lighter fuse and all woprksf great.
SOURCE: 98 dodge durango the brake light won't turn off
either the button under the brake pedal is stuck or moved a little, or the relay in the back is stuck in close positoin
1,033 views
Usually answered in minutes!
×