Question about 1998 Cadillac DeVille

Open Question

What is exp id 7, 82 and 84 ?

Theses codes are shown on the display panel

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi, I have a suzuki ignis 2004. I stayed out of electricity, so my blaupunkt radio needs a code. Please anyone help me. on a radio there is little sticker on the side with the following codes serial...


CODE 1793
Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Press and Hold "BAND"
The display will now show " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press and Hold "BAND" to Enter

Dec 12, 2014 | 2004 Suzuki Ignis

1 Answer

Suzuki Ignis radio code ?


Nikolay Spasov code 3096
Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Press and Hold "BAND"
The display will now show " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press and Hold "BAND" to Enter

Dec 10, 2014 | Suzuki Cars & Trucks

1 Answer

Bmw e90 fault codes


the error codes are BMW specific and yes an error code would show up as a cam position sensor fault.

May 11, 2014 | 2008 BMW 320D E90

1 Answer

I need a fuse diagram for ford explorer 1996


Go to the following and go to page 300. It is your owners manual and the fuse panels (underhood and instrument panel) are shown with fuse ID's.
http://www.motorcraftservice.com/pubs/content/~WOTEXP/~MUS~LEN/41/96expog1e.pdf

Apr 11, 2013 | 1996 Ford Explorer

1 Answer

Have ford s-max with dtc code F00616 what does if mean?


It is a common misconception that the instrument cluster self test gives DTC's for the engine management system, it provides cluster related DTC's on test 10 of the cluster self test, DTC should be displayed above the code, these will be displayed at 1 second intervals, once you press OK again the cluster will scroll to the next test, the format of the codes shown in the cluster is designed for Ford engineering and can only be translated into usable codes by Ford IDS.

The only way to find out why the engine management light is on is to have a scan of the engine management control module carried out using an appropriate code reader, this will give you the standard EOBD codes for example a catalyst efficiency code would show P0420. If you want to do this on a DIY basis then cheap code readers are available on the internet for around $75.00, these code readers also reset the light after the fault has been fixed. if this was helpful please leave me good feedback

Apr 06, 2013 | Ford Cars & Trucks

1 Answer

What does (Exp) stand for or mean?


Exp stands for export. On cars sold outside the US instead of a written message on the message center on the dashboard it would say exp and a number. The owner can look up the number in their owners manual written in their language to read the message. GM did this instead of making the dashboard display in different languages. A dealer may be able to reprogram your car so it just displays the message. Hope that helps.

Mar 06, 2011 | 1997 Cadillac DeVille

1 Answer

Unlock procedure for vw/audi


audi gamma cc type


1e2fb0f.jpg The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.

  1. Turn on radio. The radio display shows "SAFE".
  2. Press the FM1 and AM buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the FM1 and AM buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.




audi delta






0cf92c2.jpg

The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.

  1. Turn on radio. The radio display shows "SAFE".
  2. Press the FM1/2 and DX buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the FM1/2 and DX buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Mar 29, 2010 | 1997 Audi A4

1 Answer

Need to id #1 plug and #1 on distributer


rotate crankshaft bolt until piston 1 is top of or peak of it stroke.of course with spark plug 1 out of socket with something like a screwdriver that can reach to piston.

Nov 21, 2009 | 1988 Ford Escort EXP

Not finding what you are looking for?
1998 Cadillac DeVille Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...