1999 jeep 4.7 serpine belt routing - 1999 Jeep Cherokee

BELT ROUTING DIAGRAM 1997 Mercury Sable 3.0L SFI 6cyl The Belt Routing Diagram

Fig. Fig. 16: Rotate the belt tensioner and...

Fig. Fig. 17: ... remove the belt from around one of the pulleys to remove the belt

WARNING Use caution when removing or installing the belt and make sure the tool does not slip from the drive belt tensioner or personal injury or damage to the belt tensioner and the belt may occur.

1. Attach a 15mm socket or wrench to the bolt attaching the tensioner pulley.
2. On all 3.0L (OHV) engines, rotate the drive belt tensioner clockwise to relieve belt tension and slide the belt off the pulleys.
3. On 3.0L (DOHC) engines, rotate the tensioner counterclockwise to relieve belt tension and slide the belt off the pulleys.

To install:

1. Install the drive belt on all the pulleys except the tensioner pulley.
2. Rotate the belt tensioner as outlined in the removal procedure to relieve belt tension and install the belt onto the tensioner pulley. Make sure the V-grooves make proper contact with the pulleys. Make sure the spring keeper releases or improper belt tension will occur.

DAYCO belts publishes a free on line diagram pdf format book of belt routing. Just google it.

Hello - here is a picture of the belt routing for your Jeep.

It depends on the engine size for the belt routing.

Click on the "x" for the diagrams on the following engine sizes:
FIRING ORDER AND BELT ROUTING Firing Order and Belt Routing X90, Vitara & Grand Vitara Fig. 1: 1998 1.6L engine Firing order: 1-3-4-2 Distributor rotation: Counterclockwise
Fig. 2: 1999-02 1.6L engine Firing order: 1-3-4-2 Distributorless ignition system (coils over No. 2 and 4 cylinders)
Fig. 3: 2.0L engine Firing order: 1-3-4-2 Distributorless ignition system (one coil over each cylinder)
Fig. 4: Accessory V-belt routing- 1.6L engine with A/C
Fig. 5: Accessory V-belt routing-1.6L engine with A/C and P/S
Fig. 6: Accessory V-belt routing-1.6L engine with P/S
Fig. 7: Accessory serpentine belt routing-1.8L and 2.0L engines
Fig. 8: Accessory V-belt routing-1.8L and 2.0L engines
Fig. 9: Accessory V-belt routing-2.5L engine with P/S
Fig. 10: Accessory V-belt routing-2.5L engine with A/C and P/S

1. Step 1 Find the belt tensioner pulley. The tensioner pulley is generally between the crankshaft and a component toward the top of the hood area.
   
2. Step 2 Check the belt routing so you know how to replace the belt. You may be able to find a belt routing diagram on a decal on the fan shroud or in support documentation. Otherwise, make you own sketch for reference.
   
3. Step 3 Rotate the belt tensioner pulley, using the wrench, to and relieve tension on the belt.
   
4. Step 4 Slip off the old belt and slowly release the tensioner pulley.
   
5. Step 5 Use your belt routing diagram to put the new belt onto all of the pulleys. Pay close attention to the water pump pulley, as incorrect routing can cause the water pump to run backwards and overheat.
   
6. Step 6 Make sure the belt is correctly routed and seated on all pulleys. Rotate the tensioner again to allow for the belt to slip onto all pulleys and then release the tensioner again to regain correct tension on the belt.
   

CLICK on the following LINK. It has the Water Pump Belt Diagrams you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1999/make/jeep/model/grand_cherokee/1999_jeep_grand_cherokee_drive_belt_routing_diagram.htm

1997 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P

* Belt Routing Diagram Multiple Accessory, w/o P.S., w/o A.C.



* Belt Routing Diagram Multiple Accessory, w/P.S., w/o A.C.



* Belt Routing Diagram Multiple Accessory, w/A.C.




1997 JEEP WRANGLER - L6 4.0L 242ci GAS FI N S

* Belt Routing Diagram Multiple Accessory, w/o A.C.



* Belt Routing Diagram Multiple Accessory, w A.C.



For more details, you can visit DAYCO Catalog

I hope help you with this. Good luck (remember rated this help).

go to ask .com and put in the search belt routing for a 97 chevey malibu 3.1 or 3.8 engine what ever u have in your car

Check under the hood for routing sticker. Most cars have one there. If not, you could ask the dealer or your local auto parts store for it. You could also buy a motor manual with the diagram in it. Here you go. hope this help. http://www.autozone.com/az/cds/en_us/0900823d/80/10/b6/be/0900823d8010b6be/repairInfoPages.htm

its tight but possibe, look at the routing diagram under the hood if there is one, if not look up on google.com how to route the belt for ur car