1998 Chevrolet Metro Logo

Related Topics:

D
David JC Posted on Feb 13, 2014

Replace belts on 1998 chevy metro 3 cyl

Remove and replace ac belt and fan belt diagram

5 Related Answers

Anonymous

  • 362 Answers
  • Posted on Mar 28, 2009

SOURCE: The diagram for the replacing the serpentine belt

Here you go.
308e45c.png Please let me know if this information is helpful. Positive feedback is appreciated. Thank You!

Ad

Anonymous

  • 1 Answer
  • Posted on Jun 27, 2009

SOURCE: 1998 chevy cavalier Alternator Drive Belt diagram

Check out this link... better than a diagram, a photo.

http://www.automotiveforums.com/vbulletin/showthread.php?t=309192

note: on my screen this guy's "purple" circle looks more like a light blue, maybe lavender.

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Oct 06, 2009

SOURCE: I need the Diagram of a serpentine belt on 2001

With AC, I hope.55d2d41.gif

Testimonial: "Thanks so much! I had a difficult time finding this diagram. Will be replacing it when we do the waterpump in a few days. "

Anonymous

  • 20 Answers
  • Posted on Jan 10, 2010

SOURCE: Diagram of Serpentine Belt 1998 Chevy Cavalier

diagram should be on the radiator shroud / top of radiator

Patrick Rayome

  • 1757 Answers
  • Posted on Mar 06, 2010

SOURCE: replacing serpentine belt on 2000 chevy van need belt diagram

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

I am assuming this "van" is a Chevy Venture?
CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/venture/2000_chevrolet_venture_drive_belt_routing_diagram.htm

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 1989 chevy 1500 5.7L the ac is broke and I noticed on the diagram on the fan shroud that there is a diagram for a truck without ac can I just use this belt to bypass the ac

Check to see if the AC belt turns anything else, like Power steering, Alternator, Fan, etc. I had a car with defunct AC once, and took its' belt off (the belt was just for AC) with no problems.
0helpful
1answer

How do i remove the fan to replace the serpentine belt

do not remove the fan. you have a automatic belt tensioner. look for small pulley to passenger side of fan. pulley will be attached tp leaver which is the tentioner. on the leaver in a 3/8 dive hole in it so you can attach a ratchet or braker bar in . once you in mount ratchet push or pull on ratchet to release tention hold back on tentioner and take belt off pay close attention to how the belt is routed.
0helpful
1answer

I NEED TO KNOW THE POSITION OF THE TIMING MARKS ON MY 1998 CHEVY METRO

Click over diagram for zoom...

zjlimited_699.gif

Fig. 2: Timing belt alignment marks

Hope helps.

1helpful
1answer

Passat 1998,4cylinders, turbo, what is the belt routing diagram, the power steeling belt is related with the water pump or not, thank you

The ancillary belts routing diagram for a 1998 VW Passat 1.8 Turbo

tdisline_822.jpg
AC = Air Conditioning
CS = Crankshaft
F = Fan pulley
G = Generator
PAS = Power Assisted Steering
T = Tensioner pulley
WP = Water Pump

1. Viscous coupling removal (lock the viscous coupling).

tdisline_823.jpg

2. Lock the ancillary drive belt tensioner.

tdisline_825.jpg

3. Lock the coolant pump.

tdisline_826.jpg
4. Remove the coolant pump drive belt.
5. Remove the ancillary drive belt.
6. Release the A/C tensioner if vehicle is equipped with A/C (Air Conditioning).
7. Remove the A/C compressor drive belt.
3helpful
1answer

How to replace timing belt on 3 cyl geo metro

remove accesory belts remove carank pulley remove t belt covers
set cyl 1 TDC change belt
1helpful
2answers

Am replacing belt on 1998 dodge 3500 van w/ 360 &ac. do I have to rout belt over fan or will it install without doing that?

IT SHOULD ROUTE OVER THE FAN ON THE SMOOTH SIDE OF THE BELT. NOT THE RIBBED SIDE. THERE SHOULD BE A DIAGRAM ON A WHITE STICKER UNDER THE HOOD. FOLLOW THE DIAGRAM CLOSELY AND YOU SHOULD BE JUST FINE. P.S.THE FAN DOES NOT HAVE TO BE REMOVED TO INSTALL THE BELT. I HOPE THIS HELPS. PLEASE FEEL FREE TO KEEP ME POSTED. THANKS FOR USING FIX-YA. GOOD LUCK
0helpful
1answer

I want to disconnect the air conditioner on my 1998 Ford E-250 6 cyl engine. Exactly which fuse do I remove?

you want to remove the AC fan belt and buy a new belt to replace the old one so that you do not lose horse power form the parisitic darin caused by the belt and compressor.
Not finding what you are looking for?

253 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...