Question about 1987 Dodge Ram Wagon B250

Open Question

1987 dodge 250 ram van ignition module location

Posted by on


4 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 369 Answers

SOURCE: how do you fix sticking caliper pistons

If its the piston thats sticking you can purchase a kit for it but your probably better off buying the caliper. If the caliper is sticking and not sliding back and forth you need to buy a brake hardware kit for it. From my experience the brake hose usally collapses on the inside and causes it to stick you might want to check this out.

Posted on Nov 30, 2009

Testimonial: "thank you the info was helpful"

  • 1 Answer

SOURCE: 1989 Dodge Truck B250 Van V8-318 ignition control

its built into the ecm located right in the middle of he firewall from under the hood, big black box with two plugs.

Posted on Apr 19, 2010

  • 246 Answers

SOURCE: locate the fuel filter on a 1990 Dodge Ram Van 250

The fuel filter is located on the left side of the truck on the inside of the frame and its right below where your left foot would be sitting in the truck, the fuel line unscrews from the fuel filter there is 1 1/2" bolt holding it to the frame

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

1987 dodge van 250 when warmerd up it just stops wait a couple og mins it restarts

Does it continue to run once restarted? Is the only issue a single stalling once warmed up?

Dec 19, 2015 | Dodge Cars & Trucks

1 Answer

Ignition module location

The ignition module is built in to the computer (PCM)

Feb 12, 2014 | 1987 Dodge Ram Wagon B250

1 Answer

I need to remove an ignition switch from a 1987 Dodge van

1. Check the Motors, or similar manual at your public library for your van or enter your problem in your internet search engine.

Oct 30, 2009 | 1987 Dodge Ram Maxivan

1 Answer

How do I remove and replace the steering column of 1992 ram 250 v

remove coupling from top of steering rack ( make sure you mark postition of coupling first with centre punch so the replacement will be in the same position)
remove covers from steering column and ignition + anything else attached to column. good luck

Jul 27, 2009 | 1992 Dodge Ram

2 Answers

1987 dodge ram van STEERING COLUMN

to whom this may concern did you find a steering column. Are you replacing it in a 1987 dodge pick-up

Apr 23, 2009 | 1987 Dodge Ram Wagon B250

1 Answer

How do I install a new starter in a 93 Dodge Ram van B-250 8 cyl.

Park van so that you can safely access the starter. I use ramps under front wheels and put it in park and set the parking brakes. Disconnect positive battery cable at battery, disconnect starter battery cable and ignition wires from starter solenoid (remember terminal locations as these will attach to new starter solenoid). Remove old starter. Replace with new starter. Re-attach wiring in reverse order.

Mar 26, 2009 | 1993 Dodge Ram 250

1 Answer

87 Dodge ignition module location

it is a pick up module in the distributer then to the coil!

Jan 24, 2009 | 1987 Dodge Ram 50

1 Answer

Ignition problem

It should be underhood, driver side on upper firewall, it does not look like a typical ignition module, but I looked around and for your info, you can find a picture of it on Hope this helps.

Sep 26, 2008 | 1988 Dodge B250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides