My car seems to be heavy on juice how can i solve the problem?

'Honda 160i' appears to refer to a Honda car available in South Africa or a Honda Racing cart engine. All vehicle related questions need full;

year make model

The information you require is likely on'y available in a factory blueprint and only available from the factory or in a technical bulletin.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01gch1pK_xAtjorZxLzcxu_neaBBg%3A1611436350202&ei=PpEMYIbaC5Sw5NoPi4qJKA&q=honda+160i+crankshaft+specs

..

reset immobiliser I HAVE A HONDA CIVIC 1.6 LUXLINE ...

www.fixya.com/cars/t23058317-reset_immobiliser
Jan 22, 2014 - reset immobiliser I HAVE A HONDA CIVIC 1.6 LUXLINE 1998. I NEED TO BYPASS THE IMMOBILSER TO START THE CAR WITHOUT IT ... Press any button on remote one time within 20 seconds. .... How can i fix my honda 160i luxline92 model starting difficulty? Jul 20 ... Jun 09, 2012 ' 1996 Honda Civic.

Its a job for a mechanic!.
You will need trained help to pinpoint the problem (camshaft/valve gear) and the cause but anything of this degree is time and money. Its possible a good breakers yard maybe able to get you something off a similar model.

A bad TPS causes a hesitation in the same spot when you accelerate. It's like a dead spot.

Removal sequence: ---------------- ' 2 8 10 6 4 ' front ' ' of ' 3 5 9 7 1 ' engine ----------------******************************************************Torque sequence: ---------------- ' 9 3 1 5 7 ' front ' ' of ' 8 6 2 4 10 ' engine ----------------****************************************************** Step 1: torque bolts in sequence to 14 Ft/Lbs Step 2: torque bolts in sequence to 36 Ft/Lbs Step 3: torque bolts in sequence to 49 Ft/Lbs Step 4: retorque bolts (1) and (2) to 49 Ft/Lbs

Valve clearance with the cylinder head temperature less than 100 degrees Fahrenheit, is as follows:
Intake .007 - .009 inches
Exhaust .009 - .011 inches

faulty water pump (should have been replaced when the cam belt was replaced), or sticking/faulty thermostat!!

right under the dash. it looks like a thined out black waffle. your gonna need a OBD-II enable scantron and no you do not have an EK-3. you have an EG model, 96 is the start of the EK models. 2001 for the EP, Ect. Honda's are my specialty, so for any more inquires for any honda except the bikes email me at [email protected]

Hi, is not the complet manual but have all the wiring diagrams about this model: Honda Civic 1997

I have long time ago one '97 Ferio and work for me.

Good luck, and remember rated this help.

Torque settings for what part of the engine?