SOURCE: tranmission oil change
There is a drain plug on your accord for this. Run the car to reach operating temp. and remove passenger side front wheel for easier access to drain plug, which is located near the front of the wheel/tire. The drain plug is removed by inserting a 1/2 inch drive ratchet, or extension into the square recess of the drain plug, and then remove like u would a regular bolt or nut. Have a drain pan ready. Replace plug, tighten to 36 ft lbs , replace wheel, with a long thin funnel, add fluid thru dipstick opening with engine running, shift thru the gears several times to allow fluid to flow thru trans. Do not overfill, check level with car parked on level surface. To check fluid level, do NOT screw dipstick in. Let me know if u need more help/info.
SOURCE: what is the auto transmission
dextron mercron is pretty much universal for all automatice transmissions
SOURCE: where is the transmission dipstick loacated on a
Most of hondas dipsticks are on the passenger side of the car near the front of the car usually a really short stick.way down low.
SOURCE: 1998 honda passport auto transmission slips
CHECK THE TRANSMISSION FLUID TO SEE IF IT IS LOW. THERE SHOULD BE A COLD LEVEL AND A HOT LEVEL. WITH THE TRANS IN PARK AND HOT, ENGINE RUNNING PULL THE DIPSTICK TO SEE IF THE TRANS NEEDS FLUID. WHEN ADDING, MAKE SURE THE PROPER FLUID IS USED. IF THE TRANS FLUID LEVEL IS OK BUT THE TRANS FLUID SMELLS BURNED OR IS VERY DARK THEN HAVE THE TRANSMISSION SERVICED WITH FLUID AND FILTER. I HOPE THIS HELPS. THANKS FOR USING FIX-YA AND FOR ANY COMMENTS. BEST OF LUCK
SOURCE: honda ballade luxline auto 1996
It does not have a clutch in the true sense of the word, it has a torque converter which are two two dishes with vanes in them and the one drives the other by means of fluid. If the fluid in the torque converter and the transmission is low or the linkages or downshift cables are out of adjustment, you will have the symptoms of a "slipping clutch".
373 views
Usually answered in minutes!
×