SOURCE: 1994 regal custom door
R/F door trim will have to be removed. Most likely you will find linkage disconnected from the inside latch of the outside door handle. You might even find a broken piece of the door handle requiring replacement
SOURCE: I went to open the driver side door and the
the door handle is either broke or a part of it has slipped loose, either way, you'll have to remove the inner door panel to get to it, this is not difficult, a few screws and the panel is retained by push in type plugs that can be pryed loose. the entire door latch assy is held in by screws and is serviced by replacement, the difficulty come with very tight area to work in, and is irritating and time consuming, if you are not good with tools i'd suggest a good mechanic or body shop. always get a quote!!
SOURCE: driver side doors do not open from outside, inside
The repair will require removal of the door panel and adjustment/replacement of the rod that connects the outside handle to the lock mechanism, or replacement of the handle itself.
SOURCE: I have a '93 Buick Regal Custom. Last year I was
I have this problem every year with my car, 1993 buick regal custom, 3.8. What happens is it gets cold, warms up a bit, and ice or snow melts and gets in the door, then it gets cold again and it freezes. I go to unlock and open the door from the outside and this problem arises.
There is a vertical rod on the left side of the drivers side, right side of the passenger side, that gets bent, from trying to open the door when that mechanism is frozen up. Just bend it back, a TINY bit and it will start working.
I got tired of taking my door apart every time it happened so i cut a little "door" in the cover thing, so i can get at that bar.
I also tried coating it in grease and that seems to lessen the frequency.
SOURCE: The driver's side and passanger's
either both outside door handles are broken or door handle linkages are loose. remove door panel for visual inspection and verify
65 views
Usually answered in minutes!
×