Here is the diagram i made in paintbrush, not the best, but it will get the job done. I didn't have a diagram on mine and just had to figure it out. And that not fun with the room you dont have in there.HOPE THIS HELPS!
Look under the hood and in the engine bay there is always a diagram in there when you have a serp belt
SOURCE: I need a diagram for serpentine belt replacement on a 1999 For Escort ZX2
the diagram is located in the engine compartment under the hood.
Clean off the surfaces and it is one of the stickers there.
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!
SOURCE: need diagram for 1999 ford escort zx2 serpentine
HERE ARE THE 3 DIFFERENT FORMS OF BELT ROUTING FOR YOUR VEHICLE.
Good Day!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.
witout a/c
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
2,270 views
Usually answered in minutes!
×