How to change spark plugs in a mercury sable 2008 V6

SOURCE: changing rear spark plugs

yes you have to take your front motor mount out and come along the motor forward you do not need to take the intake off

SOURCE: mercury sable 2002 serpentine belt change

There are also two serpentine belt types for the 2002 sable. The S and U type engine. Take the old belt with you the the parts store. As for the diagram, I googled it under images and about a dozen correct ones came up. Remember the 2002 sable is the same as the 2002 Tarus.

SOURCE: location of the camshaft position sensor in a 2004 mercury sable

it is located on top of the engine right below the air inlet tube at the base of the intake it is a black sensor on top of a silver housing where the distributor would normally be

Colin Stickland

• 22516 Answers
• Posted on Apr 05, 2010

SOURCE: firing order for 99 mercury sable 3.9 v6

153624

SOURCE: I acnnot find how to

The following procedure will reset your oil change light. Thank you for using Fixya!

2008-2010 Sable

1. Turn the ignition to run (one position before starting engine).
2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.