At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you need to use the diagnostic program too do this step after a full service
ie check and replace brake pads and fuel filters paper filter oil and fluids and filters then reset its ecu
try to ask the local garages who has the right cable and tools and ask them to either do the full service and reset it
or reset it if youve done a service
this only comes on at a major service point or if the ecu detects an issue so is not just a short service
anything from worn pads to bad oil presure can cause this too trigger as well as miles count
according to my alldata book a 2007 model can only be reset by the dealer ,but look on some of the chinese automotive software sites on the web as no doubt they may have cracked it and produced a small unit to clear the service inspection light by now
Multifunction display Trip odometer reset button Scroll forward/back button System selection button Buttons + and - for setting specific functions and volume control good luck
Switch ignition on and immediately press the button to the bottom left of the speedo (trip reset type button) TWICE !! Switch Ignition off Press and hold same button while switching ignition on. After 10 seconds a new interval will display followed by a beep. Release the button and switch ignition off. All done.
Turn key to position 2. press the button to show the service due light.
release button. turn key off. press and hold the same button to view
the service light, within 2 second turn key to position 2. wait up to
10 second and the light will reset to show new service. This may take a
couple of trys (make sure the doors are shut).
×