Brake light flickering on dashboard of 2001 - Cars & Trucks

SOURCE: need to know about changing the timing belt on my 2001 mitsubishi

This will take about 3-4 hours. If you look at the drive belts, they will all have to be taken off to get to the timing belt. The engine crankshaft has to be positioned for marks to line-up. The crankshaft will have to be prevented from turning so you can take off its drive pulley. Rotate until the alignment cylinder is near TDC, remove sparkplug, then packing a small rope on top of the piston prevents the engine from turning.. Once you change one timing belt, you will never buy another car with a timing belt again. You can get a manual on eBay.

SOURCE: where is the fuel filter located in the 2001 mitsubishi galant?

can you tell me where the fuel filter is located on a 01 mitsubishi galant?

SOURCE: My dashboard lights don't work on my 2003 mitsubishi galant. Is there a fuse box?

Yes, There is a fuse box ... your owners manual will asssit you in locating it and the suspect fuse ... do your parking lamps work? Is your dimmer turned all the way down?

SOURCE: Starter on 2001 mitsubishi galant es 2.4L not working

dont know exsacly where is but should be where gear box meets engine and it sounds like the soliniod is stuck or gone or starter could be stuck in engine if manual put in gear and rock back and forward this may help relase it

Vincent G

• 2363 Answers
• Posted on Dec 16, 2009

SOURCE: SRS dashboard light on mitsubishi galant 2001

Here's a quick check list for most common cost of SRS / Air bag problem.


Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat

(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity problem.

I DO NOT disconnecting the negative battery connector to clean the code(s)

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate me answer if it is useful to you.


Cheers,

Mustgo