PLEASE I require the cylinder head torque spec for 1989 volvo S40 Thanks
First off you need new bolts as they are one time use stretch to yield bolts.
Step 1 - 20nm , step 2 - 60nm then 130 degrees of bolt head rotation*.
SOURCE: head bolt torque specs and timing marcs for a 94 volvo 960 6cyl
you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you have
SOURCE: had a valve job done
Hello
I Hope this Help this is the the timinig belt set up for the 1.9 turbo petrol
Regards Paul
www.limotec.co.uk
SOURCE: Message Light - S40 Volvo
unhook possitive post on battery....wait and then reconnect...this usually works...make sure fuel cap is always tight and never leave car running while refueling. this causes 85% of engine lights coming on
SOURCE: cylinder head torque specs on a 2000 volvo s70 2.4 Liter
you have torque cylinder head bolts in 3 steps first torque bolts 14 ft lbs then second torque all bolts to 43 ft lbs step three torque all cylinder bolts to plus 90 degrees.
255 views
Usually answered in minutes!
×