I have a BMW x5 2004 4.4Lt. When i drive it slows down and give a warning that says ''Enigine failsafe prog''. The 4x4 light allso came on. Then it said DSC 4x4 inactive. Looking for answers, it seems like the DME is giving problems, but i am unable to locate the DME.

SOURCE: i also have a trans.failsafe prog.indicator light on my 2000 bmw

You have an alternator or battery concerne,low voltage caused all the other problems,Start with a battery,then have alternator tested.The failsafes are designed to keep from burning up solenoids and other electronic components.

SOURCE: DTC/DSC warning light appeared on my 120d

My advice - take the vehicle to your local dealer - tell them you just want it diagniosed - agree a time of say 20 minuits. That way you will know for sure and can then carry out any diy repairs yourself BUT should it require a complete hydraulic unit which is likely as they are hmm what's the word ... ****!- contact BMW customer service for financial contribution. Anon

SOURCE: My dynamic drive inactive light came on what do it

YEAH CHECK YOUR BELT MINES DID THE SAME THING ITS THE SERPENTINE BELT

SOURCE: BMW X5 2004 TRANS FAILSAFE PROG

Hi; If I get the 'Trans Failsafe Prog" message twice within about 2 hours, The SES light will go on automatically. Since I do not seem to have any real transmission problems, this SES message clears itself in about 24 hours. The "Trans Failsafe Prog" messageseems to be used to indicate other transmission problems as well, like loss of transmission fluid, so be careful. I have a 2002 X5. Cheers. Omer

SOURCE: BMW warning lights: BRAKE, ABS and DSC

i need anyone one to help me with this problem, i have a BMW328ci and i tried tyo get out of my house this morning and all roads were frozen and the car started sliping and i activated the dcs button and car was still slipering and then brake, ABS, CBC & DSC lights turned on and i need to know how i can reset these lights so they can come off