This feature used to work but it has stopped along with the steering wheel tilt and telescope feature
SOURCE: Telescopic Steering wheel won't move down - I hear a gear spinning
Open the gear motor on the left hand side of the telelscopic assembly. Take the plate off held by 4 philips screws. Using a 10mm socket, remove the bolt holding the platic gear. Remove plastic gear and insert the reverse way. Over the years, one side of the gears get worn out.
SOURCE: Telescopic Steering wheel won't move down or up
Yes it would be perfectly ok to disegauge the auto switch to keep it from moving again. It needs a tilt motor replaced . not a easy job.
SOURCE: LEXUS LS 400 STEERING DOESNT GO DOWN
I had the same problem and took the steering wheel apart on the left side where the lift motor is. There is a plastic gear that controls your lift that is stripped out. I went to the dealership and they wanted $500 for the assembly, they wouldn't sell just the gear. I went home and after I thought about it a while came up with the idea to turn the gear around backwards since the teeth on that side were in good shape. I put it back together and it has worked great ever since. This should work for you with very little effort. I do now however do not hold or apply alot of pressure to the wheel when it is lifting as this is what causes this problem in the first place. Hope this helps you. Todd
67 views
Usually answered in minutes!
×