P0730 trouble code

The service and repair manual with diagram will help you to locate and fix the problem step by step on your own and you will get the manual from the given link https://toolsnyou.com

https://www.rangerovers.net/forum/6-range-rover-mark-iii-l322/239242-2009-hse-range-rover-transmission-fault-p0730.html
https://www.rangerovers.net/forum/9-range-rover-sport-l320/267530-transmission-service-p0735.html
https://www.rangerovers.net/forum/9-range-rover-sport-l320/48932-range-rover-sport-2012-transmission-issue.html
https://www.yourmechanic.com/article/p0746-obd-ii-trouble-code-pressure-control-solenoid-performance-or-stuck-off-by-valerie-johnston

P0730 Incorrect Gear Ratio
At the link below describes
1. Symtoms
2. Potential Causes
3. Diagnostic and Repair steps
Check out this link to OBD-Codes.com
P0730 Incorrect Gear Ratio

If you have any other questions, Please post back.

P0730 Incorrect Gear Ratio
At the link below describes
1. Symtoms
2. Potential Causes
3. Diagnostic and Repair steps
Check out this link to OBD-Codes.com
P0730 Incorrect Gear Ratio

If you have other questions, please post back.

P0730 is your problem code for incorrect gear ratio, this is usually due to a bad clutch pack in the transmission, meaning it needs rebuilt or get a remanufactured one.

Hi Ahmed

This code tells your mechanic that there is a transmission problem.
(Incorrect gear ratio)
Check out the link below for details.

Hope this helps.
-Steve




P0730 OBD II Trouble Code

code P0730 TCM A/T SHIFT CONTROL SYSTEM.possible cause PCM detected the lockup clutch did not lock or unlock correctly. code P0780 automatic transaxle malfunction.

problem could be transmission range sensor or faulty shift solenoids.i would let transmission check it out using diagnostic equipment to check transmission shift solenoid the scanner will manual test solenoids see if they are working.and scanner will check transmission range sensor make sure transmission shifting in right gear.

There is no one fix works for all on these code. Also you have left out the letter and one number of the code I assume these are P0730 and P0733, if so read on.

P0730 CHRYSLER - Incorrect Gear RatioPossible causes- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Shift solenoids harness or connectors
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0733 CHRYSLER - Gear Ratio Error In Third GearPossible causes- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0717 - Input/Turbine Speed Sensor Circuit No Signal.

Try to find with your dealer this Bulletin Number: 20730022:
Bulletin Date: 20031001
Category: 980000 OTHER
Summary: SERVICE ENGINE SOON LIGHT ON WITH DIAGNOSTIC TROUBLE CODES P0716 AND / OR P0717, P0730, P0753, P0758, P1860, P1887 OR OTHER MISCELLANEOUS TRANSMISSION TROUBLE CODES SET. *TT

Good luck.